ZOTAC GeForce GT 730 4GB Zone Edition DDR3 Graphics Card – ZT-71115-20L

ZOTAC GT 730 4GB Zone Edition is a clearly identified NVIDIA GeForce GT 730 graphics card built around 4GB DDR3 and PCI Express 2.0. Its specification profile is suited to basic display upgrades, office desktops, legacy monitor connectivity and quiet passive-cooling systems. The exact manufacturer part number is ZT-71115-20L, allowing procurement teams and system builders to match the requested card to the correct packaged product rather than relying only on the GPU family name.

ZOTAC GT 730 4GB Zone Edition

ZOTAC GT 730 4GB Zone Edition combines the GPU, memory subsystem, display connectivity and physical cooling design into one defined board-level product. The card uses 4GB DDR3 with a 64-bit memory interface and provides Dual-Link DVI, HDMI and VGA. This makes the product specification easy to evaluate for new builds, upgrades and project-based procurement where compatibility, chassis clearance, display outputs and power requirements must be checked before deployment.

For organizations purchasing graphics hardware, model accuracy is particularly important because cards using the same NVIDIA GPU can differ in memory capacity, clock configuration, cooler size, output layout, power connector and recommended system power. ZOTAC GT 730 4GB Zone Edition should therefore be selected by its complete product specification and manufacturer part number, not by GPU name alone.

Key Features

Key reasons to consider ZOTAC GT 730 4GB Zone Edition include the following product-specific characteristics:

• NVIDIA GeForce GT 730 graphics processor with 384 CUDA cores
• 4GB DDR3 graphics memory on a 64-bit memory interface
• PCI Express 2.0 host interface
• Display connectivity: Dual-Link DVI, HDMI and VGA
• Cooling design: Passive Zone Edition cooling
• Power connection: No auxiliary connector listed
• Card dimensions: 145.79 x 111.15 mm

The combination of NVIDIA GeForce GT 730, 4GB DDR3 and 1600 MHz memory clock defines the core performance platform. Actual application performance will depend on the host system, driver version, workload, power configuration and software optimization. For professional deployments, the required application certifications and driver branch should also be reviewed before purchase.

Technical Specifications

The ZOTAC GT 730 4GB Zone Edition specifications below organize the key identifiers and hardware information needed for comparison, quotation, deployment planning and product verification.

Performance, Memory and Workload Fit

GPU performance is not determined by memory capacity alone. Compute resources, graphics architecture, memory bandwidth, power limits, software support and workload behavior all influence real-world results. With 384 CUDA cores and 4GB DDR3, this model provides a defined balance for basic display upgrades, office desktops, legacy monitor connectivity and quiet passive-cooling systems. Users working with large textures, complex scenes, AI models, high-resolution timelines or multiple displays should assess both GPU compute capability and available video memory.

ZOTAC GT 730 4GB Zone Edition uses a 64-bit memory interface and 1600 MHz memory clock. These specifications help buyers compare the card against alternative configurations in the same GPU generation. Where the card will be used for sustained rendering, simulation or compute workloads, case airflow and ambient temperature should be considered alongside the GPU specification.

Connectivity and System Compatibility

The card connects to the host through PCI Express 2.0 and provides Dual-Link DVI, HDMI and VGA. Display support is listed as Up to 3 displays. Before installation, confirm motherboard slot availability, chassis clearance, display-cable requirements and any adjacent-slot restrictions created by the cooler.

Power planning is equally important. The manufacturer guidance for this model is 300W recommended system power supply. The card uses No auxiliary connector listed. A quality power supply with the correct native connectors is preferable to improvised adapters, and the entire system load should be considered rather than the graphics card in isolation.

Cooling, Size and Installation

The cooling configuration for this model is Passive Zone Edition cooling. The listed card dimensions are 145.79 x 111.15 mm, and the card is classified as Dual-slot. These details are important for workstation and gaming cases where radiator placement, front fans, drive cages or expansion cards can reduce available GPU clearance.

When installing ZOTAC GT 730 4GB Zone Edition, use the motherboard slot recommended by the system manufacturer, secure the card correctly to the chassis and verify that power cables are fully seated. Driver installation should use an appropriate current NVIDIA driver branch for the intended gaming, creator or professional workload. Firmware and operating-system requirements should also be checked for new-generation PCIe and display features.

What is ZOTAC GT 730 4GB Zone Edition?

ZOTAC GT 730 4GB Zone Edition is the specific GeForce GT 730 4GB Zone Edition graphics-card configuration identified by manufacturer part number ZT-71115-20L and GTIN/EAN 4895173605352. The product name, memory configuration and part number together provide a reliable way to distinguish it from nearby variants that may use a different cooler, memory capacity, factory overclock, regional package or connector layout.

Who should choose ZOTAC GT 730 4GB Zone Edition?

This model is relevant to buyers whose system and workload match its performance, memory, physical-size and power requirements. It can be considered for basic display upgrades, office desktops, legacy monitor connectivity and quiet passive-cooling systems. For business procurement, deployment teams should validate software requirements, target display configuration, chassis compatibility and power capacity before standardizing the card across multiple systems.

Business Procurement Through HCOM Group

HCOM Group can support quotation and technology sourcing for ZOTAC GT 730 4GB Zone Edition for business, reseller and project requirements. Supplying the exact manufacturer part number helps reduce model ambiguity during procurement, especially when several cards share a similar GPU name but differ in memory, cooling or regional packaging. Availability, lead time and final supplied configuration should be confirmed against the quotation before ordering.